Fact Sheet FS1394
Solar energy is becoming increasingly important for meeting our needs for clean, renewable power. While some perceive solar energy as requiring vast land areas, research suggests the land needed to power the entire U.S. with solar represents a small fraction of the nation's land mass. However, the desire to develop solar on productive farmland has created localized competition for land. Furthermore, as demand increases for both food and energy, protecting productive farmland while meeting energy goals has become an important policy consideration. Agrivoltaics offers a solution: It allows crop production AND solar energy generation on the same land. The panels are installed in such a way to allow for continued crop production or animal grazing.
The declining cost of solar equipment and installation makes these systems financially attractive for many agricultural producers. However, evaluating whether agrivoltaics makes sense requires careful consideration of installation costs, energy revenue, maintenance expenses, and the impacts on current farming practices. This bulletin outlines the decision-making process when considering agrivoltaics, highlighting the key information needed to make informed decisions.
Is Agrivoltaics the Right Choice?
Agrivoltaics works best when:
- Electricity is expensive
- The local grid has enough capacity to receive excess power
- The farm grows crops or grazes animals that can tolerate/benefit from partial shade,
- The land is relatively flat and easily accessible
- The farmer has long-term plans to keep farming the land and sees agrivoltaics as a way to increase income
- The income from solar power generation integrated into the farm is financially beneficial for all parties involved (e.g., farmers, landowners, and solar developers, when applicable)
Agrivoltaics isn't right for every farm. Consider whether a farm aligns with the above conditions. Agrivoltaic systems must make money from both farming operations and electricity production. Unlike traditional solar farms that mainly generate electricity, agrivoltaic systems create two income streams, but both need careful evaluation.
Agricultural Production
The panels will create partial shading, which may affect what can be grown and how much the yields will be. It is important to understand:
- How shade impacts crop or forage production - some crops tolerate or even benefit from partial shade
- Whether changes are needed to crop production procedures
- How the microclimate can affect yields - reduced water needs, protection from heat stress, wind and frost protection.
Your local Extension agent, specialist, or an agronomist can help with evaluating crop performance under partial shade. Yield estimates made by solar system installers may not always be accurate.
Electricity Production
The amount of electricity revenue generated depends on how much energy the panels generate and what that energy is worth. Several factors affect solar electricity production, including:
- Sunlight intensity - solar irradiance varies by latitude, elevation of the location, weather conditions and season
- Panel orientation and tilt angle - which direction panels face and at what angle
- Spacing of panels and layout of rows (alters airflow, shading, and overall incidence of sunlight)
- Efficiency of the inverter in converting the DC power into AC power
- Shading from nearby trees and buildings
- Local temperature - panels work better in cooler weather
- Panel efficiency and degradation - most panels drop between 0.5% and 1% in output per year1
- Maintenance (timely inspection, cleaning, and repairs for optimal panel functioning)
In agrivoltaics, panel height, tilt, and spacing are often adapted to balance crop needs with energy production. For example, elevated panels allow light to reach the crop more uniformly and make it easier for taller farm equipment to get through the field but may cost more to install. Furthermore, transpiration by the crop can cool the panels slightly, improving their efficiency. Solar developers will estimate electricity production, typically providing monthly projections. These estimates should account for:
- Shade patterns throughout the year
- Panel degradation over the system's lifetime (25 to 30 years)
- Panel racking system (e.g., fixed-tilt, trackers, or vertical bifacial systems)
Figure 1. Elevated single-axis trackers at the Rutgers University Clifford E. & Melda C. Snyder Research and Extension Farm in Pittstown, NJ. The pivot point is eight feet above the ground, and 32-feet row spacing allows adequate access for farming equipment. Pictured is a PTO driven mower for hay production. Image courtesy of the Rutgers Agrivoltaics Program.
Tools and Resources
The National Laboratory of the Rockies (NLR), formerly known as the National Renewable Energy Laboratory, provides free tools to estimate system performance for solar arrays.2 PVWatts is an easy-to-use calculator used for estimating solar energy production. The System Advisor Model (SAM) is a more detailed calculation tool that incorporates solar equipment specifications and calculates cash flow projections.
How Much Does Agrivoltaics Cost?
Solar system size is often expressed in installed DC power in Watts, representing a system's (direct current) capacity to generate electricity under optimal conditions. The cost of solar installations is often expressed in dollars per Watt because power output scales linearly with system size, making Watts the natural unit for cost comparisons across differently sized projects. Economies of scale emerge because many costs (e.g., permitting, interconnection fees, and overhead) are largely fixed or grow more slowly with increased capacity. Consequently, utility-scale installations can achieve costs below $1.50/Watt while small systems may cost $2.50 - $3.50/Watt, with the difference attributable to the amortization of fixed costs across a larger amount of installed capacity.
Just as with investing in a new irrigation system or tractor, agrivoltaic costs must be weighed against the expected improvements in a farm's output and profitability. Research indicates that agrivoltaic installations are more expensive to build than traditional solar farms. According to findings from NREL, implementing agrivoltaic technology adds $0.07 to $0.80 per installed Watt to the installation costs, representing a 4% to 52% premium over standard fixed-tilt photovoltaic systems with comparable energy output. Cost differences vary based on the intended agricultural use (i.e., growing crops, grazing livestock), the physical design of the infrastructure, and the accessibility of the land. The table below shows an example of potential cost differences for a 500-kW system. Note that actual costs can be substantially different compared to the costs listed in the table.
| Cost Category | Traditional Fixed-tilt System | Single-axis Tracker Agrivoltaic System |
|---|---|---|
| Equipment ($/WDC) | $0.83 - $0.91 | $0.91 - $0.94 |
| Setup & Installation ($/WDC) | $0.70 - $0.82 | $0.82 - $0.89 |
| Total ($/WDC) | $1.53 - $1.73 | $1.73 - $1.83 |
| Example: 500-kW system | $765,000 - $865,000 | $865,000 - $915,000 |
Equipment and Installation Costs (Direct Capital Costs)
- Solar panels (modules)
- Mounting structures (e.g., galvanized posts and mounting frames)
- Inverters (to convert DC power from the panels to AC power usable on the grid)
- Racking systems (e.g., fixed-tilt systems, single-axis trackers, etc.)
- Wiring and other electrical components (e.g., terminal boxes, isolation switches, etc.)
- Monitoring equipment (e.g., data recording devices, sensors, etc.)
- Fencing
- Labor for system setup, electrical work, supervision, etc.
Set-up and Planning Costs (Indirect Capital Costs)
- Engineering and design
- Permitting fees
- Utility interconnection fees - costs to connect to the grid
- Agrivoltaic-specific planning (e.g., soil assessments, agricultural equipment choices, site surveys, environmental studies, etc.)
- Agronomic consultation (i.e., working with experts to optimize crop selection and management)
- Infrastructure modifications (e.g., access roads, irrigation, drainage, removal of existing tree lines and hedgerows, etc.)
Note that contingency funds (typically 5 to 15% of installation costs) should be budgeted to cover risks such as design revisions, unforeseen site conditions, and/or price fluctuations. Including contingency funds ensures realistic budgeting and minimizes the impact of cost increases on the project's total budget.
Ongoing Operating and Maintenance (O&M) Costs
Agricultural Operations
Experienced farmers already understand the ongoing O&M costs of production. When adding an agrivoltaic system, it is important to consider the following:
- Adjustments (if any) to crop production scheduling and growing strategy
- Harvesting logistics within an agrivoltaic array
- Livestock management (if grazing animals around the panels)
- Farming equipment modifications or adjustments for fertilizer and weed management
Cost estimates for an agrivoltaic project should include crop-specific or livestock-specific operating and maintenance costs.
Solar System
- Future inverter replacement (typically after 10-15 years)
- Tracking system and wiring repairs
- Panel cleaning (if needed)
- Monitoring and inspection
- Weed management (if needed)
NLR estimates typical O&M costs at $40 per installed kWDC per year for mid-size systems (approximately 3-MWDC, in 2024).5 Solar developers usually offer maintenance contracts at an annual fee. Farmers should understand what costs are covered when considering the purchase of a maintenance contract.
How Much Income Can Be Generated from Agrivoltaics?
Earnings and savings from agrivoltaics depend on several factors:
- How much electricity can be produced (size of the solar array)
- How much electricity is consumed on-site
- The arrangement with the local utility (net metering or wholesale sales)
- The current electricity rate or wholesale market rate
- How electricity prices change over time
Before evaluating any agrivoltaic proposal, it is key to assess existing usage trends. This can be done by reviewing 12 months of electric bills. Different electric utilities calculate their charges differently, and bills may include:
- Energy charges - a cost per kWh of usage (these can change depending on time of day and season)
- Delivery charges – a cost per kWh of electricity delivered
- Demand charges - a cost based on peak usage
- Fixed charges - monthly fees regardless of usage
Farmers are encouraged to work with a solar developer to analyze their electric bills. Solar developers should be able to demonstrate how the electricity generated by an agrivoltaic system can offset these charges. Agrivoltaic installations can reduce electricity purchases from the grid, effectively locking in the current retail energy price. Financial models typically assume electricity prices will increase by 0.5% to 2.0% per year, so solar developers should share what assumptions they made for their calculations. In some cases, a solar developer will offer a power purchase agreement (PPA), which provides electricity at a rate that is often initially lower than the utility rate. However, PPAs typically include an annual escalation clause that increases the rate over time, meaning the PPA could eventually exceed the utility rate depending on how each change. Farmers should carefully review any escalation terms before entering a PPA. For more information, see the NJ Clean Energy Program's guidance on solar ownership and financing options.6
Net metering vs. Wholesale Sales
The value received for electricity generated with an agrivoltaic system differs significantly based on the purchasing arrangement with the local utility.
Net metering: Excess electricity generated with the agrivoltaic system flows back to the grid, and the producers of this electricity receive credits at or near the retail electricity rate for the "energy charges" portion of the energy bill (typically $0.10 to $0.25 per kWh). A solar energy generator only pays for "net" consumption. This arrangement benefits solar energy generators with high energy consumption because credits are valued at retail rates rather than wholesale prices.
Wholesale Sales: Without a net metering arrangement, solar energy generators can sell excess electricity at wholesale market rates (typically $0.02 to $0.05 per kWh depending on time of day and season). This rate is the same price that utilities pay large power plants.
Financial Incentives and Revenue Streams
Because agrivoltaic systems meet both clean energy and sustainable agriculture goals, they may qualify for more incentives than standalone solar installations. These incentives can significantly reduce the upfront costs and O&M expenses.
Federal Investment Tax Credit (ITC)
Agrivoltaic systems installed on farms may qualify for the Investment Tax Credit (ITC), which currently offers a 30% tax credit on eligible system costs. For example, if a system costs $1,500,000, a system owner can claim a $450,000 credit on their federal taxes.
- The credit can be claimed by system owners, including landowners or farmers
- It significantly reduces upfront capital costs
- There must be enough tax liability to use the credit (or carry it forward)
Note: The ITC schedule contains important nuances and deadlines. Federal policy has established a "begin construction" deadline for commercial ITCs on July 4, 2026, with a program termination deadline of December 31, 2027. Eligibility rules are complex, and farmers and landowners are encouraged to consult a tax professional and review current IRS guidance and New Jersey Board of Public Utilities' (BPU) program guidance before making investment decisions.
Modified Accelerated Cost Recovery System (MACRS)
Agrivoltaic systems installed on farms can be depreciated using MACRS, which provides accelerated depreciation that reduces taxable income over five years.
- The depreciable basis is reduced by half the value of the ITC7
- Agricultural buildings and infrastructure (such as an elevated racking system) may also qualify
- Work with an accountant to maximize this benefit
USDA Rural Energy for America Program (REAP)
REAP offers grants covering up to 50% of project costs and loan guarantees for up to 75%. These grants are competitive but highly valuable.
- Applications combining renewable energy with agricultural resilience (hallmarks of agrivoltaic systems) may be more competitive
- Application deadlines are typically annual
- Grant amounts vary, but large projects can receive substantial funding
- Note: REAP grants are currently paused as the program is undergoing policy and administrative changes. For the most up-to-date guidance, check directly with USDA Rural Development for updates and information on the next application window.
Solar Renewable Energy Certificates (SRECs)
Solar Renewable Energy Certificates (SRECs) are tradable credits; one SREC is earned for every 1 megawatt-hour (1 MWh = 1,000 kWh) of solar electricity a system produces. The value of the SREC is intended to reward the environmental attributes of solar energy and is separate from the electricity itself. Utilities and brokers purchase SRECs from solar system owners to meet federal and state renewable energy mandates. New Jersey's Successor Solar Incentive (SuSI) Program is the overarching framework that pays solar generators tradable credits called SREC-IIs. Within SuSI, there are two separate payment tracks depending on the size and type of project: 1) the Administratively Determined Incentive (ADI) track, where BPU sets the value of an SREC-II in advance, and 2) the Competitive Solar Incentive (CSI) track, where projects compete against each other in a bidding process; SREC-II bids are ranked from lowest to highest value and selected for an award until the procurement capacity is filled. Smaller projects (e.g., a home) typically fall under the ADI track and receive a pre-set rate, which varies according to which of the five market segments within ADI the project falls within. Larger commercial or utility-scale projects typically enter the CSI track and accept a competitively determined rate.8 The BPU administers New Jersey’s SuSI program and has established ADI SREC-II levels for eligible solar facilities that range from $60 to more than $110 per credit.9
The BPU established a specific program to encourage the development of agrivoltaic projects on eligible farmland – the Dual-Use Solar Energy Pilot Program (“Pilot Program”). Pilot Program participants may apply for incentives through either the ADI Program or CSI Program.10 If a participant chooses the ADI Program, it will receive the incentive for the applicable market segment. Those who choose the CSI Program are not required to compete in a CSI solicitation but are eligible for a CSI base incentive level that corresponds to the Board‘s awards from the most recent CSI Program solicitation.
| Name | Description | Eligible Technologies |
|---|---|---|
| Business Energy Investment Tax Credit (ITC) | Eligible projects that begin construction by July 4, 2026, with a program termination deadline of December 31, 2027, can receive the full tax credit of 30%. | All renewable energy technologies |
| Rural Energy for America Program (REAP) Renewable Energy Systems | Grants for up to 50% of project costs. Loans up to 75% of total eligible project costs. | Small and large solar generation |
| Solar Renewable Energy Credits (SRECs) [NJ transitioning to successor program] | Each 1,000 kilowatt-hour (kWh) of solar generation earns one SREC. | All solar energy technologies |
| Modified Accelerated Cost-Recovery System | 5-year depreciation schedule | All solar energy technologies |
| For more information on state-specific incentives, consult the Database of State Incentives for Renewables and Efficiency (DSIRE). | ||
Agricultural Production Considerations
Farmers should also include crop or livestock revenue in the profitability calculations. Important factors to consider are:
- Land removed from production - amount of farmland needed for the solar array
- Expected yields under partial shade - be conservative and base estimates on research data
- Crop price trends - use multi-year averages, not just current high prices
- Potential benefits - reduced irrigation needs, heat stress protection, extended growing seasons
- Operational changes - additional labor or equipment costs
Alternative Revenue Models
Farmers may benefit from agrivoltaics without purchasing and owning solar equipment. Through lease agreements, farmland owners and operators can lease their land to solar developers for rental payments, generating a steady revenue while keeping the land in agricultural production. Alternative arrangements can distribute benefits and risks among multiple parties. For instance, a solar developer could own the solar infrastructure, earning revenue from electricity production (including SRECs) , while paying rent to the landowner, and compensating the farmer for maintaining agricultural operations beneath the arrays. This shared revenue model allows farmers to benefit from agrivoltaics without assuming debt or project ownership risks.
Farmers who lease farmland with agrivoltaic arrays may benefit financially through:
- Reduced or eliminated land rent payments
- Farmer stipends paid by solar developers or landowners
- Compensation for vegetation management services
Case Study 1: Large Agrivoltaic Array on a 50-acre Soybean Farm
Below is a hypothetical example of a 50-acre soybean farm implementing a 7-MW agrivoltaic project over 25 years. The case study serves to model the integration of various financial drivers; however, the projections are for conceptual purposes and do not substitute for a site-specific financial analysis.
Agrivoltaic Project Financials
This agrivoltaic installation requires a total investment of $14.0 million (50% financed with a loan at 7% interest) and generates $27.0 million in revenues over 25 years, resulting in $1.5 million in net revenue. Primary revenue sources include Solar Renewable Energy Certificates (SRECs at $95 /MWh for 15 years, totaling $14.0M) and energy sales ($0.055/kWh over 25 years, totaling $13.1M). This represents a 2.7% internal rate of return and adds approximately $1,210 per acre annually to farm income.
The financial model analyzed a 7-MWDC agrivoltaic system with a total installation cost of $14 million ($2.00/WDC) to the owner with O&M costs of $40.00 per kWDC annually. The system requires 50.0 acres of land. Energy production includes 1st year production of 10,500,000 kWhAC, with a system degradation rate of 1.0% per year. Energy is valued at $0.055 per kWh with an annual price escalation of 2.0%. The model incorporates a Solar Renewable Energy Credit (SREC) of $95 per MWh (without an additional SREC adder) and NO Solar Investment Tax Credit (ITC). Financing assumptions include a debt interest rate of 7.0%, a debt fraction of 50.0%, and a debt term of 15 years. General economic parameters include a discount rate for net present value calculations of 3.0%, a marginal corporate tax rate of 23.0%, and an analysis period of 25 years. The estimated residual value of installations at year 25 was $2,058,000, with a net present value of $983,000. DC = direct current, AC = alternating current.
| Financial Metric | Amount ($) |
|---|---|
| Costs | |
| Purchase price | $14,000,000 |
| Maintenance & Operations (25 years) | $7,000,000 |
| Financing costs | $4,528,000 |
| Total Costs | $25,528,000 |
| Revenues | |
| Solar Investment Tax Credit (ITC) | $0 |
| SRECs (15 years @ $95/MWh) | $13,959,000 |
| Energy production value (25 years @ $0.055/kWh) | $13,076,000 |
| Total Revenues | $27,035,000 |
| Net Revenue (over 25 years) | $1,507,000 |
Impact on Agricultural Operations
The agrivoltaic system was estimated to reduce soybean yields by 15% due to the land occupied by the solar energy infrastructure and shading effects. Production costs were estimated to increase by approximately 2% ($12/acre) due to agricultural operations around the solar array. Despite these challenges, the solar revenue stream ($1,210/acre annually) far exceeds the net loss in soybean profitability ($117/acre), increasing total farm profitability from $165/acre to $1,093/acre.
| Financial Metric ($/acre) | Conventional Farming | With Agrivoltaics | Difference |
|---|---|---|---|
| Soybean Returns | $700 | $595 | -$105 |
| Production Costs | $535 | $547 | $12 |
| Net Soybean Returns | $165 | $48 | -$117 |
| Agrivoltaic Revenue | $0 | $1,210 | $1,210 |
| Total Farm Profitability | $165/acre | $1,258/acre | $1,093/acre |
The case study demonstrates that agrivoltaics can transform farm economics by adding substantial solar revenue that far outweighs modest agricultural production losses. While the agrivoltaic system might reduce soybean yields by 15% and increase production costs by 2%, the net impact on farm profitability is overwhelmingly positive. The solar project income is driven primarily by SREC payments and energy sales.
Case Study 2: Small Agrivoltaic Array on a 50-acre Soybean Farm
Below is a hypothetical example of a 50-acre soybean farm implementing a small 100-kW agrivoltaic project under a net metering agreement over 25 years.
Agrivoltaic Project Financials
The agrivoltaic installation requires a total investment of $250,000 and generates $607,000 in financial benefits over 25 years, resulting in $257,000 in net revenue. Primary revenue sources include Solar Renewable Energy Certificates (SRECs at $95/MWh for 15 years, totaling $199,000) and a net metering arrangement which values energy production at $0.12 /kWh over 25 years, totaling $408,000. This represents a 9.2% internal rate of return and adds approximately $205.60 per acre annually to farm income.
The financial model analyzed a 100-kWDC solar photovoltaic system with a total installation cost of $250,000 ($2.50/WDC) to the owner with O&M costs of $40.00 per kWDC annually. The system is installed on 1 acre of productive farmland. Energy production includes 1st year production of 150,000 kWhAC, with a system degradation rate of 1.0% per year. Energy is valued at $0.120 per kWh with an annual price escalation of 2.0%. The model incorporates a Solar Renewable Energy Credit (SREC) of $95 per MWh (without an additional SREC adder) and NO Solar Investment Tax Credit (ITC). The financing assumptions include no debt financing. General economic parameters include a discount rate for net present value calculations of 3.0%, a marginal corporate tax rate of 23.0%, and an analysis period of 25 years. The estimated residual value of installations at year 25 was $64,000, with a net present value of $31,000. DC = direct current, AC = alternating current.
| Financial Metric | Amount ($) |
|---|---|
| Costs | |
| Purchase price | $250,000 |
| Maintenance & Operations (25 years) | $100,000 |
| Financing costs | $0 |
| Total Costs | $350,000 |
| Revenues | |
| Solar Investment Tax Credit (ITC) | $0 |
| SRECs (15 years @ $95/MWh) | $199,000 |
| Energy production value (25 years @ $0.120/kWh) | $408,000 |
| Total Revenues | $607,000 |
| Net Revenue (over 25 years) | $257,000 |
Impact on Agricultural Operations
The agrivoltaic system occupies 2% of the productive farmland. Thus, soybean yields are reduced by 15% on only the small portion of land occupied by solar infrastructure, resulting in the total value of yield reduction of $2.10/acre. Likewise, production costs increased on a small portion of the farm by approximately 2% resulting in the total production costs increasing by a nominal amount ($0.21/acre). The solar revenue stream ($205.60/acre annually) far exceeds the net loss in soybean profitability ($2.31/acre), increasing total farm profitability from $165/acre to $368.29/acre. Note that a large portion (67%) of the solar revenue is actually a reduction in energy costs. In other words, these are energy costs that the operation would have paid if it were not for the agrivoltaic array and net metering arrangement. Also note under a net metering arrangement, energy consumption on the farm must approximate the energy produced from the array.11
| Financial Metric ($/acre) | Conventional Farming | With Agrivoltaics | Difference |
|---|---|---|---|
| Soybean Returns | $700.00 | $697.90 | -$2.10 |
| Production Costs | $535.00 | $535.21 | $0.21 |
| Net Soybean Returns | $165.00 | $162.69 | -$2.31 |
| Agrivoltaic Revenue | $0.00 | $205.60 | $205.60 |
| Total Farm Profitability | $165.00/acre | $368.29/acre | $203.29/acre |
Both case studies demonstrate that agrivoltaics can transform farm economics by adding substantial solar revenue that far outweigh modest agricultural production losses. While the agrivoltaic system might reduce soybean yields and increase production costs, the net impact on farm profitability is overwhelmingly positive in both cases. These financial case studies suggest that agrivoltaics can offer a pathway for farmers to enhance farm viability by diversifying income streams, improving resilience, and maintaining agricultural land use while contributing to renewable energy goals. The success of agrivoltaic projects depends critically on favorable policy incentives (particularly the SREC program), access to appropriate financing, and careful site design that balances continued agricultural productivity with energy generation.
Questions to Ask Solar Installers/Developers
Before committing to an agrivoltaic system, solar installers/developers should be able to provide detailed answers to the following questions.
Questions About Production Estimates
- How did you calculate crop yields in the agrivoltaic array? What research or data supports these estimates?
- Do the electricity projections account for panels losing efficiency over time? (They should include 0.5% - 1.0% annual degradation)
- What assumptions are you making about the electricity rate and future price increases?
- Have you included both direct electricity savings and potential SREC revenue?
Questions About Costs
- Are direct and indirect costs itemized separately for the solar and agricultural components?
- What specific agricultural modifications or farm equipment changes are included in the cost estimate?
- What are the annual O&M costs, broken down by the type of agrivoltaic system?
- Are there any costs not included in the proposal that I should expect?
Questions About System Design
- How will panel height, spacing, and orientation affect my farming operation?
- Can I access the land with my current equipment, or are modifications needed?
- How will crop irrigation be affected, or does it need to be adjusted?
- What happens to existing drainage patterns?
- What is the plan for decommissioning at the end of the useful life of the agrivoltaic system?
Questions About Contracts and Warranties
- What warranties cover the panels, inverters, and racking? (Panels typically 25 years, inverters 10-15 years)
- Who is responsible for maintenance and repairs?
- What happens if I want to sell the farm? Is the system transferable?
- If this is a lease, what are the exact terms and who owns and maintains the equipment?
Questions About Incentives
- Which local, state, and federal incentives apply to this agrivoltaic installation?
- Has the proposal accurately accounted for SRECs, grants, and tax credits?
- Will you help with REAP grant applications or other incentive paperwork?
- What happens if incentives change or aren't approved?
Common Mistakes to Avoid
- Not getting multiple bids - Always get at least three proposals from different installers/developers
- Overestimating agricultural yields - Use conservative estimates based on actual research that evaluated plant responses to shaded growing conditions
- Ignoring long-term O&M costs - Make sure maintenance costs for the system are included
- Not consulting your accountant - Applying tax credits and using depreciation calculations require professional guidance
- Not having a legally binding document that spells out the responsibilities, expectations, and rewards for all parties involved
Next Steps: Deciding whether to Move Forward with Agrivoltaics
If landowners/farmers are seriously considering agrivoltaics, below are key steps to follow.
Gather your information
- Collect 12 months of electric bills
- Document your current agricultural yields and practices
- Identify available land and any restrictions
Do your homework
- Contact the local Extension service about crop performance under shade conditions
- Research solar incentives at www.dsireusa.org
- Talk to other farmers with agrivoltaic systems if possible
- Investigate the local regulations for permitting agrivoltaic installations
Request proposals
- Get quotes from at least three qualified agrivoltaic installers/developers
- Ensure each proposal addresses both energy and agricultural production
- Ask all the questions listed above
Consult professionals
- Review proposals with an accountant for tax implications
- Have an attorney review any contracts or lease agreements
- Work with an agronomist on crop selection and management
Run the numbers
- Use conservative estimates for both energy and agricultural revenue
- Include all costs - installation, O&M, decommissioning
- Calculate payback period and return on investment
- Consider what-if scenarios: What if electricity prices don't increase? What if crop yields are lower than projected?
Before you sign
- Understand all costs, revenues, and assumptions
- Verify incentives and confirm eligibility
- Be sure the proposed system also works for long-term farming plans
- Have legal and financial professionals review the final contracts
Figure 2. Vertical bifacial panels at the Rutgers University Cook Campus Animal Farm in New Brunswick, NJ. The clearance height below the panels is four feet and the row spacing is either 20 or 40 feet for research purposes. Pictured are beef cattle grazing around the panels. Image courtesy of the Rutgers Agrivoltaics Program.
Summary
Agrivoltaic systems present a unique opportunity to harvest crops or raise animals and generate electricity from the same land simultaneously. Agrivoltaic systems can offer additional agricultural returns, resiliency benefits, and potential land-use efficiencies compared to traditional solar farms.
By understanding both the energy and agronomic dimensions of agrivoltaics, landowners/farmers can make informed, economically sound decisions about whether this technology fits their operation.
The key takeaway: Agrivoltaics is not just about adding solar panels; it's about integrating energy production into a farming system in a way that enhances both. Landowners/farmers are encouraged to take the time to carefully evaluate, ask detailed questions, and ensure that any agrivoltaic system truly serves their farm's long-term goals and viability.
Glossary of Key Terms
Agrivoltaics: The co-location of solar panels and agricultural production on the same land.
Inverter: Equipment that converts DC power generated by solar panels to AC power used in buildings and on the grid
kilowatt-hour (kWh): The unit of energy used on electric bills; one kWh equals 1,000 watts of electricity used for one hour.
Modified Accelerated Cost Recovery System (MACRS): An IRS depreciation method that allows accelerated write-offs for solar systems.
Net metering: A policy that allows an electric rate payer to receive credit for excess electricity they send to the grid, in effect letting the rate payer use their own generated electricity and reducing their bill to just the net usage.
Photovoltaic (PV): The process of converting solar radiation directly into electricity; commonly called "solar energy".
Renewable Energy Credit (REC): A certificate that can be sold and that represents the clean energy benefits of the electricity generated.
Solar Renewable Energy Credit (SREC): A type of REC specific to solar energy production.
Resources and Further Reading
Federal Resources
Database of State Incentives for Renewables & Efficiency (DSIRE)
NREL PVWatts Calculator
NREL System Advisor Model (SAM)
USDA Rural Energy for America Program (REAP)
State Resources
NJ Board of Public Utilities
NJ Clean Energy Program
Rutgers Cooperative Extension
For More Information:
Lead author: Kevin P Sullivan, Senior Economist, Rutgers University School of Environmental and Biological Sciences and the New Jersey Agricultural Experiment Station (kps@njaes.rutgers.edu) in collaboration with other members of the Rutgers Agrivoltaics Program.
Additional agrivoltaics information can be found at: agrivoltaics.rutgers.edu
© Rutgers Agrivoltaics Program, 2026
This publication was developed to help landowners/farmers evaluate agrivoltaic systems. While every effort has been made to ensure accuracy, landowners/farmers should consult with qualified professionals before making investment decisions.
References and Notes
- Deline, Chris, Dirk Jordan, Bill Sekulic, Josh Parker, Byron McDanold, and Allan Anderberg. 2024. PV Lifetime Project – 2024 NREL Annual Report. Golden, CO: National Renewable Energy Laboratory. NREL/TP-5K00-90651.
- NREL's calculation tools can be found at: pvwatts.nlr.gov and sam.nlr.gov
- Horowitz, Kelsey, Vignesh Ramasamy, Jordan Macknick and Robert Margolis. 2020. Capital Costs for Dual-Use Photovoltaic Installations: 2020 Benchmark for Ground-Mounted PV Systems with Pollinator-Friendly Vegetation, Grazing, and Crops. Golden, CO: National Renewable Energy Laboratory. NREL/TP-6A20-77811.
- Source: Horowitz, Kelsey, Vignesh Ramasamy, Jordan Macknick and Robert Margolis. 2020. Capital Costs for Dual-Use Photovoltaic Installations: 2020 Benchmark for Ground-Mounted PV Systems with Pollinator-Friendly Vegetation, Grazing, and Crops. Golden, CO: National Renewable Energy Laboratory. NREL/TP-6A20-77811.
- Ramasamy, V., et al. (2023). U.S. Solar Photovoltaic System and Energy Storage Cost Benchmarks, With Minimum Sustainable Price Analysis: Q1 2023. NREL/TP-7A40-87303.
- New Jersey CleanEnergy Program Solar Ownership and Financing Options
- Following is an example of depreciable basis reduction due to the Investment Tax Credit (ITC). A business installs a solar energy system for $100,000. The system qualifies for the ITC, and the business receives a tax credit worth $30,000 (i.e., 30% of the installed cost). Under tax rules, the depreciable basis must then be reduced by 50% of the ITC (i.e., the adjusted depreciable basis = $100,000 minus $15,000 = $85,000). Therefore, the business can claim depreciation deductions on $85,000, not the full $100,000 installed cost. Using the 5-year MACRS accelerated schedule, the deductions would be: Year 1-20% ($17,000), Year 2-32% ($27,200), Year 3-19.2% ($16,320), Year 4-11.52% ($9,775), Year 5-11.52% ($9,775), and Year 6-5.76% ($4,930).
- New Jersey CleanEnergy Program Competitive Solicitation Incentive (CSI) Program
- Administratively Determined Incentive (ADI) Program, as of March 2026.
- Dual-Use Solar Energy Pilot Program
- In some cases, a net metering arrangement will allow a customer to offset energy consumption at other separate locations owned by the customer (known as remote net metering). In New Jersey, the Remote Net Metering program allows eligible public entity customers (e.g., municipalities, public agencies) to offset energy consumption at separate locations. Farmers and private landowners should confirm their eligibility for any net metering arrangement (including whether their utility and rate class qualify) before factoring remote net metering into financial projections.
November 2026
Copyright © Rutgers, The State University of New Jersey. All rights reserved.
For more information: extension.rutgers.edu.
Cooperating Agencies: Rutgers, The State University of New Jersey, U.S. Department of Agriculture, and Boards of County Commissioners. Rutgers Cooperative Extension, a unit of the Rutgers New Jersey Agricultural Experiment Station, is an equal opportunity program provider and employer.